Looking for the Perfect Kitchen Sink? Check Out Our Size Recommendations

Kitchen sinks are an essential part of any kitchen. Not only do they help keep your kitchen clean, but they also add a touch of style and personality to the room. If you're in the market for a new kitchen sink, be sure to check out our size recommendations! We have a variety of different sizes and styles to choose from, so you're sure to find the perfect one for your kitchen.

Kitchen Cabinets and Sink Widths

When it comes to kitchen sinks, the width is one of the most important considerations. For example, if you have a kitchen cabinet that's 500mm wide and you want to install a kitchen sink, then you should use the same measurement for your kitchen sink. Anything wider may look out of place when installed in your kitchen. Kitchen cabinets are approximately 500 to 550mm wide, and the kitchen countertop is between 550 and 650mm. The width of a stainless steel sink for the kitchen is usually 450 to 500 mm. If it is any wider, then it would be classified as a different type of sink altogether.

Reserved Space and Sink Width

The minimum width needed when installing the sink on the countertop should be 100-150mm. The general rule is to leave three inches free in the back and seven in the front, or vice versa. However, these measurements are not exact, so it's best to consult your designer according to your specific situation.

Remember that the majority of sinks are put in near or under the window. Before starting your project, be sure to figure out if your kitchen sink is placed inside or outside of the window. And if it's located by an open window, keep in mind where exactly on the sink the faucet is -- you don't want it to get in way of being able to fully open and close the window. This might seem like a small issue but it's actually quite important, so take care not overlook this detail!

Sink Length

The width of the sink was analyzed earlier, now it is time to focus on the length. In order to do this, we need to know where exactly the designer placed the sink in relation to the cabinet. Once we have that information, we can then determine how long of a position the sink needs.

A double sink can be installed if the countertop space in the kitchen is more than 1200 mm long. On average, a double sink is 800 mm, which leaves 400 to 500 mm of space for preparation like cutting vegetables on a board. Furthermore, having a double sink creates the illusion of more space in the kitchen and helps with hygiene since it's easy to clean.

If the cabinet sink position is 1200mm or less, then think about getting a larger single sink. You should be looking at 650 to 700mm, even if it's a relatively large single sink. A large single sink is ideal for hosting dinner parties or big families. You can wash large items with ease and if you're worried about water usage or convenience, you can always purchase a draining basket or basin to go along with it. Plus, when you're not using it, simply set it on the counter instead of having to take it down.

Now that you know the kitchen cabinet sink width and length requirements, all that's left is to choose a kitchen sink design. Kitchen sinks come in a variety of styles and colors, so be sure to pick one that matches your kitchen décor!

Conclusion

Whether you need a single, double, or triple bowl kitchen sink, we have the ideal size to fit your kitchen space. We also offer kitchen sinks with various configurations and materials, so you can find the perfect match for your decor. Our kitchen sinks are designed to last, so you can trust that they will withstand everyday wear and tear. Once you've chosen the right kitchen sink for your home, be sure to take into account proper installation guidelines provided by our experts. With the correct installation techniques and our quality kitchen sinks, there's no doubt that your kitchen will look great! So don't wait any longer - check out our kitchen sink size recommendations today and make your dream kitchen a reality!

FAQ

Q: Do sink lengths differ from home to home or are there general size measurements?

A: In general, there are uniform specifications because it's easier for the kitchen sink factories.If they didn't do this, then they would have to be constantly changing their production based on customer feedback and requests. This would take up a lot more time, as well as additional resources like cardboard and foam which separately would have to be ordered for each client request. With some creativity however, these materials could easily be reused in other ways.

Consequently, if you're not ordering in large quantities from businesses that can manage that output or if you don't already know the precise amount and size of parts your project will demand, it's best to use an existing pattern or blueprint for products similar to what you envision.

Q: How to find the right size faucet for your sink, how to ensure that the water comes out evenly over the whole sink, and what to do if you're afraid you'll end up with a lopsided shower.

A: Most faucets are 150-200mm wide. If your sink has an internal diameter of 400mm, the water level should be in the middle. So for a normal installation, the width of your sink's internal diameter shouldn't be less than 300mm; otherwise, the water will be diverted to one side of the sink. To make sure that your kitchen faucet is installed properly, you can use a template or a ruler to measure out the center and make sure that everything is even on both sides. If you’re worried about having lopsided water pressure, you can always test it with a kitchen cup before deciding which kitchen faucet to purchase. Additionally, if your kitchen has an existing shower head, you might want to consult with an experienced plumber in order to ensure that installation goes smoothly.

Q: What is the typical width of a sink?

A: The inner diameter size of the sink isdictated by the width of either thematching cabinet or countertop. Foreign made sinks tend to be just a little wider than those produced domestically; typically 400 mm (15 3/4 inches) vs 360 mm (14 1/8 inches).

Q: Can I replace my double sink with a single one? If so, how do I go about it?

A: Depending on the size you need, Cresheen can customize a right sink for you. The size of the new sink will not be based off of the old one, but rather how big or small your countertop opening is. If you need more information, please contact us.